Remediation done. Now keep surfaces protected.
A light-activated antimicrobial coating applied after remediation, giving higher-risk surfaces in Northern Ireland homes and businesses ongoing protection against microbial regrowth.
RH / Temperature Log 30 Days
● Relative humidity ○ Temperature
Post-remediation protection
Humidity trend logging
Temperature recording
Environmental reporting
Stability guidance
Treated today does not mean protected next winter.
Some surfaces sit at permanent risk: cold external walls, enclosed wardrobes, steamy bathrooms. A photocatalytic coating adds a protective layer that keeps working long after the remediation visit.
Some surfaces stay high-risk
Exposed gables, window reveals and enclosed corners stay cooler and damper than the rest of the room.
Light does the work
The coating activates under natural or artificial light, breaking down microbes on the treated surface.
Low light is not a barrier
Where a space gets little light, dedicated activation lighting can be added to keep the coating working.
Protection that persists
Once cured, the layer keeps discouraging regrowth on treated surfaces without ongoing maintenance.
Remediate. Prepare. Apply. Activate.
The coating is requested in advance and applied during the remediation visit, once surfaces have been cleaned, treated and dried.
Application is targeted: the highest-risk surfaces identified in the diagnosis get the protection, rather than a blanket spray of the whole property.
Requested before your visit
Book the coating in advance so it can be scheduled into the remediation day.
Advance Request
Applied after remediation
Surfaces are remediated, treated and fully dried before the coating goes on.
Technician Installed
Continuous data capture
The coating is applied evenly across the identified higher-risk surfaces.
RH · Temperature
Simple equipment return
Natural or artificial light activates the photocatalytic layer.
Pre-Paid Return
Activation lighting (if needed)
Dark spaces can be fitted with dedicated activation lighting.
Trend Analysis
Documented application
Treated areas are recorded in your remediation documentation.
Documented Evidence
Targeted at the surfaces most likely to regrow.
Application is scoped to the property. These are the areas where the coating earns its keep.
External Walls & Window Reveals
Cold-bridging zones where condensation returns first.
— Exposed gable walls
— Window and door reveals
— Perimeter corners
— Behind furniture on cold walls
Enclosed & Low-Airflow Spaces
Spaces where still air lets moisture linger.
— Wardrobes and built-ins
— Under-stair storage
— Utility spaces
— Boxed-in pipework
High-Humidity Rooms
Rooms that generate moisture every day.
— Bathrooms and en-suites
— Kitchens
— Laundry areas
— Poorly vented WCs
Protection that is applied once and keeps working.
The coating is delivered as part of your remediation package by Mould Removal Northern Ireland, with every treated area documented.
Data analysis
Professional application across the surfaces identified in your diagnosis.
Trend graphs
Advice on lighting where activation needs a helping hand.
Interpretation
A record of the treated areas within your remediation documentation.
Stability guidance
Guidance on keeping treated surfaces performing at their best.
Simple to add to your remediation.
The coating must be requested before scheduling. It is applied during the service visit, so no extra appointment is needed.
Request the coating when booking remediation
Surfaces prepared and dried before application
Coating applied during the service visit
Treated areas documented in your report
Questions about the protective coating.
When does environmental monitoring begin?
It must be requested before scheduling, because application happens during the remediation visit once surfaces are clean and dry.
Why are longer periods useful?
It activates with light. Natural daylight or normal room lighting is usually enough, and dedicated activation lighting covers dark spaces.
Are the devices disruptive?
No. Once cured it sits invisibly on the surface and needs no ongoing maintenance.
How are devices returned?
It is targeted at the higher-risk surfaces identified in your diagnosis rather than sprayed across the whole property.
How is payment handled?
Ask for it when arranging your remediation and it is priced into the scope for the visit.
- Belfast
- Lisburn
- Derry / Londonderry
- Newry
- Bangor
- Ballymena
- Coleraine - and right across Northern Ireland
Want treated surfaces to stay treated?
Tell us before your remediation visit and the coating is applied on the day, on the surfaces that need it most.
+44 2895 600 105
info@mouldremovalbelfast.co.uk
The Mount, 2 Woodstock Link,
Belfast, BT6 8DD